Cleaning your CPAP machine is the easiest of all tasks. All you need to do is use a damp cloth and make sure that it is clean. Then wipe off the dust, dirt, and debris from the machine.
In case you want to sanitize it, there is CPAP sanitization equipment available. They mostly use UV light. So, if you want to save cost, you can just invest in a UV light separately.
It is not advisable to use water on CPAP Machines. If you're using any kind of cleaning agent, that is not advisable. The best you can do is if you want to clean it more thoroughly, you can use cleaning alcohol or hand sanitiser. But make sure to let the machine dry out before you plug it in and use it again.
The warm soapy water that you have prepared will primarily be used for cleaning the entire array of CPAP equipment. In CPAP Equipment, there are many components:
So, you will have to separate them and disassemble the machine. Make sure to keep the actual machine away.
Next, you can drop the tubing and mask into the warm water you have prepared. Rinse thoroughly by adding a few drops of liquid soap (or a mild dish detergent). Make sure that it isn't scented or other kinds of soaps that are too rough.
Then wipe everything off with a clean towel. To learn more about cleaning Filters and Water Chambers, you will have to read below.
Among all the CPAP cleaning procedures, cleaning the mask is the most important step, and you have to do it regularly. Why's that? To prevent dead skin cells, bacterial infection, and other issues.
To regularly clean your CPAP mask, you will have to use warm tap water and the same soapy solution. Make sure that you perform thorough cleaning. When you clean CPAP equipment like masks, there might be other parts.
You will have CPAP Mask Pillows, headgear, and other parts. Make sure to use only distilled water for cleaning CPAP equipment. And you can spare just a few minutes cleaning CPAP masks regularly to maintain hygiene. Let the mask air dry after daily cleaning.
It is important to clean the filter daily. If you have reusable CPAP filters, that's even better. All you need to do is pull it out and check the condition. If it is fine, then place it back.
To clean your CPAP machine filter, you need to use the same warm water and soap combination. Make sure to clean it thoroughly, and using warm tap water would be even better.
Even if the water drips, let the filter air dry for a while. If it didn't clean properly, then go ahead and put your CPAP filter in warm water for a few minutes and then try to rinse thoroughly.
If you use disposable filters, then it is better to replace it by buying a new one.
To prevent mineral deposits in the water chamber of your CPAP machine, it is pivotal to carry out proper cleaning techniques. You can use the same method of using a bathroom sink filled with water and soap solution.
However, the most important part of cleaning your CPAP water chamber is to brush or scrub it. Make sure not to use too hard of bristles, but you will have to scrub to ensure no mineral deposit is formed. Of course, distilled water is the right choice here, as well.
Once again, after wiping the water with a damp towel, let the chamber air dry.
CPAP supplies can easily wear and tear. For instance, tubing might have air leaks. Therefore, while conducting regular CPAP Cleaning, it is ideal for checking for any damage, wear, and tear. If there is any, then you should replace the CPAP components for the best performance.
If you have extra components like a humidifier tank, then you can still use the same approach of mild soap and water. If you have remaining water, make sure to discard it and not use it again.
Once the CPAP Unit it air dried, you can go ahead and use it without any issue.
There's no need for you to invest in CPAP cleaning wipes, pre-moistened towels, and other unnecessary equipment for the Nasal mask. Make sure to just perform the cleaning technique and always gently rinse your equipment and you will never have an issue.
Leave a comment